Adaptor for Concrete Water-Reservoir (200mm) TupyBSP

Description

The TUPY BSP fittings are applied for conducting water, gas, vapor, oil and other hydraulic applications in general.

Applications
The TUPY BSP fittings are applied for conducting water, gas, vapor, oil and other hydraulic applications in general.
Brands
The TUPY BSP fittings, when the dimensions so allow, are recorded with the trademark TUPY® or ® and/or with the identification of the rated diameter.
They also have the Inmetro brand
Dimensionals
Nominal diametermm measuresWeight in g
InchmmA
250mm2001371
2.1/265mm2001790
380mm2002425
4100mm2004007
Inspection
The TUPY BSP fittings are inspected in a manner to ensure the specifications of standards ABNT NBR 6943, ISO 49 and EN 10242.
Manufacturing standards
The TUPY BSP fittings are produced in compliance with the specifications of standards ABNT NBR 6943, ISO 49 and EN 10242 and TUPY specifications.
We point out that, depending upon the figure, some diameters can appear in one standard and not in another.
Material
The TUPY BSP fittings are made of Black malleable iron, in compliance with standards ABNT NBR 6590, ISO 5922 and EN 1542.
Notes
Tupy S.A. reserves the right to introduce in its product lines the alterations which it deems appropriate. The weights (g) appearing in this price list are subject to alterations without prior notice.
For your safety, ensure that the fittings acquired are in compliance with the aforesaid standards and that tightness tests are executed before final use in the networks installed.
Pressure table
Service Pressures in Conducting Fluids*Test
Pressures
TemperatureTo 120°CTo 300°CAmbient
lbf/pol²3602901500
kgf/cm²(bar)2520100
Unit Conversion
1 bar14,5 psi
1 bar1 kgf/cm²
1 bar0,1 MPa
1 psi1 lbf/pol²
* As per ABNT NBR 6943, ISO 49 and EN 10242
Surface protection
The TUPY BSP fittings are produced with a black finishing (non-toxic oil) or hot-dip galvanizing, as per ABNT NBR 6323, ISO 49 and EN 10242.
Other special claddings (Epoxy paints, cataphoretic, hybrid, double-dip galvanizing, etc.) can be supplied upon inquiry.
Thread
The sealing threads of the TUPY BSP fittings are produced in compliance withthe specifications of standards NBR NM ISO 7-1, and the coupling threads as per ABNT NBR 8133 and ISO 228.
Other thread types can be produced upon order.
Specifications
Finishing

Hot Dip Galvanized

Nominal Diameter

2.1/2″ x 200mm

2″ x 200mm

3″ x 200mm

4″ x 200mm

Pressure Class

150 LB BSP

TOP