Elbow Reducing MF Black

Description

The TUPY BSP fittings are applied for conducting water, gas, steam, oil and other hydraulic applications in general.

Applications

The TUPY BSP fittings are applied for conducting water, gas, steam, oil and other hydraulic applications in general.

Brands

The TUPY BSP fittings, when the dimensions allow, have recorded on then the brand TUPY® or ® and/or the identification of nominal diameter.

Dimensionals
Nominal diametermm measuresWeight in g
InchmmAH
1 x ¾25 x 20mm3546172
Inspection

The TUPY BSP fittings are inspected so as to ensure the specifications of standards ABNT NBR 6943, ISO 49 and EN 10242.

Manufacturing standards

The TUPY BSP fittings are produced in compliance with the specifications of standards ABNT NBR 6943, ISO 49 and EN 10242 and TUPY’s specifications.

We point out that, depending upon the figure, some diameters may appear in one standard and not in another one.

Material

The TUPY BSP fittings are produced in black malleable iron, in compliance with standards ISO 5922 e EN 1562.

Notes
Tupy S.A. reserves the right to introduce in its product lines the alterations which it deems appropriate. The weights (g) appearing in this price list are subject to alterations without prior notice.
For your safety, ensure that the fittings acquired are in compliance with the aforesaid standards and that tightness tests are executed before final use in the networks installed.
Pressure table
Service Pressures in Conducting Fluids*
Temperature-20° To 120°CBetween 120° To 300°CUp to 300°C
lbf/pol²360Interpolated value290
kgf/cm²(bar)25Interpolated value20
Unit Conversion
1 bar14,5 psi
1 bar1 kgf/cm²
1 bar0,1 MPa
1 psi1 lbf/pol²
* As per ABNT NBR 6943, ISO 49 and EN 10242
Surface protection

The TUPY BSP fittings are produced with black finishing (non-toxic oil) or hot-dip galvanizing (zinc coating processes), as per ABNT NBR 6323, ISO 49 and EN 10242. Other special coatings (Epoxy paints, cataphoretic, hybrid, double galvanizing, etc.) can be furnished upon inquiry.

Thread

The sealing threads of the TUPY BSP fittings are produced in compliance with the specifications of standards ABNT NBR NM ISO 7-1 and the coupling threads as per ABNT NBR 8133 e ISO 228. Other thread types can be made to order.

Specifications
Finishing

Black

Hot Dip Galvanized

Nominal Diameter

1″ x 3/4″

Pressure Class

150 LB BSP

TOP